Page 1 of 1

Atlas motor tune up help

Posted: Wed Sep 03, 2014 2:08 am
by HotWheelsSteve
Hello everyone. I have new Atlas brush kits, springs, screws etc, but I've some different sized motor brushes compared to others. Why is this?
Also, the springs don't fit inside the brush screws. They are identical otherwise. Can you assist me please?

They are all brand new, I bought them a long time ago on ebay. Thank you, Steve
Hopefully you can see this picture:

http://www.slotcarsillustrated.com/mist ... RAWING.JPG

Re: Atlas motor tune up help

Posted: Sun Sep 07, 2014 10:56 pm
by peter mansfield
Hi Steve
Thought I might be able to help out with some old scalex brushes but I must have been under a rock when that motor was around I haven't seen that configeration before pete

Re: Atlas motor tune up help

Posted: Sun Sep 07, 2014 11:41 pm
by HotWheelsSteve
Hi Pete, the motor brand may be Pittman, but the 1/24 chassis looks like 1/32 Atlas.

cheers
Steve

Re: Atlas motor tune up help

Posted: Tue Sep 09, 2014 12:55 am
by wixwacing
Hi Steve,

As we spoke of yesterday, you have a hybrid bunch of parts. The carbons and springs are for a larger diameter brush holder.

If anybody out there has the smaller diameter brushes and springs or knows where to get them, please contact (pm) Steve or myself on this board .