Watch this and simular space's for current and upcoming race event's. Racing news and anything new to Slot car scene can be found at redracer.com.au and you can follow our progress on the rebuild of Red Racer and our website at Red Racer Hobbies on Facebook.
Friday Night Racing
Sideways Dallara and Riley Championship
The first installment of Double R Club Racing will commence Friday the 10th of August.
Sideways are produced by Racer in conjunction with Slot.It drivetrains. The combination results in highly detailed replica's
with performance to match their looks.
They have 12 different liveries and have small design changes which made the car's appear the same but perform differently.
We have closed the gap on performance by using Slot.it race magnets throughout the 12 cars which has given them the same amount of magnet down force. The cars will be raced in stock form other than the magnet exception for some close racing. Tyres as alway's will be a must to get adiquiet grip and ride height.
CARS
Sideways Riley and Dallara SW01 to SW12
REGULATIONS
1 Control Race Magnet
Rear Tyre optional between Slot.It and MJK
Magnet pull on tester must not exceed 400grams
No other modifications to car are allowed
Must retain factory parts and interior
Double R and Red Racer presents
Slot.It Race Series
In the lead up to the Qld slot championships we will be running a 6 round club series with the choice of dropping your worst round. It will be run fortnightly starting Wednesday the 25/7/2012 -7pm sharp, aim for 6:30pm
There will be two classes run in two separate series. You may enter in them both.
1st class GROUP 1 (stock)Rules
*One Magnet, genuine standard only
*Must have at least 1.5mm ground clearance at magnet to blank set up board
*Replacement genuine slot it tyres maybe used
*Gluing in motor, magnet and genuine parts back on is allowed
*loosening of screws is allowed
*White kits must be painted
*no other modifications allowed
*Wheels must stay within the guards.
2nd Class MOD Rules
*Only Genuine replacement slot it parts allowed
*One magnet only Race Magnet can be used
*Must have at least .8mm ground clearance at magnet to blank set up board
*Standard motor only
*Gluing is allowed
*No cutting or drilling allowed
*Must have interior can be Lexan
*White kits must be painted
*Wheels must stay within the guards
Slot.It performance parts are allowed and include
Hollow axles, Mag Wheels, Race Guides, Gear ratio changes etc.
