The Slotcar Outhouse

A 'no bull' site for 1:32 slot car racing. Home of the 'Slotcar Legends'

fitting on board switch to convert anal to digtal

How DO they do that??
Post Reply
pitman704
Spectator
Posts: 2
Joined: Fri Mar 30, 2012 9:15 am

fitting on board switch to convert anal to digtal

Post by pitman704 »

Hi to all
Have just joined your forum most impressed.
Have not done any slotting for about 50 years but my grandson and grandaughter have me going again.
Have decided to use a Ninco digital master track for starters and would like some info on installing a small switch incar to switch from analogue to digital.My son has a analogue track so would like to use some of the cars on both tracks (bothtracks are Ninco)
Cheers
dangermouse
Engine Tech
Posts: 92
Joined: Tue Dec 09, 2008 8:20 am

Re: fitting on board switch to convert anal to digtal

Post by dangermouse »

Don't know if this helps

http://www.hotslots132.com/ninco-digital-chips-a-3.html

cheers
David
wixwacing
Marshal!!!
Posts: 1871
Joined: Thu Jul 10, 2008 9:22 am

Re: fitting on board switch to convert anal to digtal

Post by wixwacing »

Well you'll need a chip first which I assume you have, then you'll need a miniature DPDT switch and install it as per the link.....


Switching from digital to analogue and back


Once fitted, you can switch comfortably between digital and analogue!!!
Image

When I'm not racing slotcars,
I'm out in the back yard, burning food!!

When I win, it's because of my talent, not my car or my controller!
pitman704
Spectator
Posts: 2
Joined: Fri Mar 30, 2012 9:15 am

Re: fitting on board switch to convert anal to digtal

Post by pitman704 »

thanks for the info
Post Reply
cron